Multiple polarizers bill of materials
Jump to navigation
Jump to search
Lista de material do kit de polarização da luz com múltiplos polarizadores. As peças impressas podem ser descarregadas neste link.
Bill of materials for the multiple polarizers experimental kit. The printed parts can be downloaded from this link.
| Qtd. | Descrição | Description (English) | URL |
|---|---|---|---|
| 5 | Motor de passo Nema 17 (23 mm de espessura) | Nema 17 stepper motor (23 mm thick) | https://www.amazon.es/dp/B08FFM6LRL (0.7 A) Alternativa / Alternative: https://www.amazon.es/dp/B07SXTF72D (1.5 A) |
| 5 | Driver de motor de passo | Stepper motor driver | https://www.amazon.es/dp/B07MXXL2KW |
| 5 | Dissipador para driver de motor de passo | Heat sink for the stepper motor driver | |
| 1 | Arduino Mega 2560 | Arduino Mega 2560 | https://www.amazon.es/dp/B06Y3TZP84 Alternativa / Alternative: ELEGOO MEGA R3 (Amazon) |
| 1 | Shield RAMPS 1.4 para Arduino Mega | RAMPS 1.4 shield for Arduino Mega | https://www.amazon.es/dp/B07BSRS9WS |
| 5 | Interruptor fim-de-curso (endstop) com cabo de 70 cm | Limit switch (endstop) with 70 cm cable | EVOLT – Kit Interruptor Fim de Curso Mecânico Endstop (AIMSOAR) Alternativa / Alternative: HUAZIZ, kit de 10 / pack of 10 (Amazon.es) |
| 1 | Fonte de alimentação 12 V 8.5 A (cabo não incluído) | 12 V 8.5 A power supply (cable not included) | https://www.amazon.es/dp/B071F3H5QN Alternativa / Alternative: Kingwen 12 V 20 A (Amazon.es); 12 V 10 A 120 W (Amazon.es); fonte dupla / dual supply 12 V 10 A + 5 V 12 A, série / series RD-125 |
| 1 | Raspberry Pi 4 (4 GB RAM) | Raspberry Pi 4 (4 GB RAM) | Raspberry Pi SC0194(9) - Microcomputador Raspberry Pi 4 Model B 4GB — Mauser |
| 1 | Fonte de alimentação USB para o Raspberry Pi | USB power supply for the Raspberry Pi | https://mauser.pt/035-3400/raspberry-pi-fonte-de-alimentacao-usb-c-230vac-5-1vdc-3-0a-15-3w-branco-oficial-para-raspberry-pi-4 |
| 1 | Câmara Logitech C270 HD (USB) | Logitech C270 HD webcam (USB) | https://www.amazon.es/dp/B01BGBJ8Y0 |
| 1 | LED vermelho | Red LED | |
| 1 | Fotodíodo (detetor) | Photodiode (detector) | Farnell |
| 2 | Lente plano-convexa (LED e detetor) | Plano-convex lens (LED and detector) | https://www.amazon.es/dp/B0DB69161Z Alternativa / Alternative: lentes de acrílico / acrylic lenses https://pt.aliexpress.com/item/1005007025619408.html |
| 6 | Filme polarizador | Polarizer film | |
| 5 | Correia GT2 300 mm, 6 mm de largura | GT2 belt, 300 mm, 6 mm wide | https://www.amazon.es/dp/B0C54Z6YQM |
| 5 | Polia GT2 para o eixo do motor | GT2 motor shaft pulley | https://www.amazon.es/dp/B0CND58QZJ (kit de 10 / pack of 10) |
| 60 | Parafusos M3 | M3 bolts | |
| 60 | Parafusos M6 15 mm | M6 screws, 15 mm long | |
| 2 | Parafusos M6 30 mm | M6 screws, 30 mm long | |
| 60 | Porcas M6 | M6 nuts | |
| 2 | Insertos roscados M6 | M6 threaded inserts | |
| Filamento PLA | PLA filament |
| Peças impressas | QTY | Supports |
|---|---|---|
| 100_structural_components | ||
| MPOL-100-01_edge_revA | 6 | NO |
| MPOL-100-02_edge-special_L_revA | 1 | NO |
| MPOL-100-03_edge-special_R_revA | 1 | NO |
| 200_electronics | ||
| MPOL-200-01_power-supply-base_revA | 1 | NO |
| MPOL-200-02_arduino-base_revA | 1 | NO |
| MPOL-200-03_arduino-case_bottom_revA | 1 | NO |
| MPOL-200-04_arduino-case_top_revA | 1 | NO |
| MPOL-200-05_raspberry-pi-case_bottom_revA | 1 | NO |
| MPOL-200-06_raspberry-pi-case_middle_revA | 1 | NO |
| MPOL-200-07_raspberry-pi-case_top_revA | 1 | NO |
| 300_optical_assembly | ||
| MPOL-300-01_led-holder_revA | 2 | NO |
| MPOL-300-02_led-adjuster_revA | 1 | YES |
| MPOL-300-03_detector-holder_revA | 1 | NO |
| MPOL-300-04_detector-adjuster_revA | 1 | NO |
| MPOL-300-05_polarizer-holder_fixed_revA | 1 | YES |
| MPOL-300-06_lens-stopper_revA | 2 | NO |
| 400_polarizer_assembly | ||
| MPOL-400-01_polarizer-support_led_revA | 1 | YES |
| MPOL-400-02_polarizer-support_detector_revA | 1 | NO |
| MPOL-400-03_gear_revA | 5 | NO |
| MPOL-400-04_bar_revA | 1 | NO |
| MPOL-400-05_lid_2-stepper_revA | 1 | NO |
| MPOL-400-06_lid_3-stepper_revA | 1 | NO |
| 500_stepper_motor_holder | ||
| MPOL-500-01_stepper-holder_L_revC | 3 | NO |
| MPOL-500-02_stepper-holder_R_revC | 2 | NO |
| 600_lids | ||
| MPOL-600-01_face_large_revA | 3 | NO |
| MPOL-600-02_face_small_revA | 2 | NO |
| MPOL-600-03_face_power-supply_revA | 1 | NO |
| 700_switch_holder | ||
| MPOL-700-01_switch-holder_revA | 1 | NO |
| 800_camera_holder | ||
| MPOL-800-01_camera-base_revA | 1 | YES |
| MPOL-800-02_camera-support_revA | 3 | YES |
| MPOL-800-03_camera-arm_revA | 1 | YES |
| MPOL-800-04_camera-joint_revA | 1 | YES |
