# Description of the Experiment

This laboratory uses a Geiger-Müller detector to measure the radiation from a radioactive source ($$^{241}Am_{95}$$, Amerício), and study the absorption of radiation of different materials by putting them between the source and the detector.

• Video: [indisponível]
• Laboratory: Intermediate em e-lab.ist.eu[1]
• Level: ***

# Experimental Apparatus

The user can set the distance between source and detector (between 6cm and 20cm), and choose which material to place between the two parts.

The available materials are:

Position Material Thickness
1 Wood 10 mm
2 Corticite 10 mm
3 Brick 10 mm
4 Copper 0,2 mm
5 Copper 0,4 mm
6 Copper 0,8 mm
7 Copper 1,6 mm
8 Copper 3,2 mm
9 Control window (air) 0,5 mm

The tenth position is, actually, "closing" the source.

# Protocol (Basic Laboratory)

The suggested protocol for this experiment in the Basic Laboratory is the following:

1. Study the variation of the radiation intensity (given by the detector's output) as the distance changes;
2. Verify the linear absorption rate of the different materials, trying to establish a theoretical law that relates the intensity with the surface mass of each element;
3. For copper, infer length of semi-reduction, i.e. the length it takes to halve the number of Geiger-Müller counts;
4. The user will observe that experiments conducted under the same conditions will give different values. This is caused by the randomness of nuclear processes. A way to prove this is to verify that the number of counts in the same conditions follow a Binomial or Poisson Distribution due to the extremely low probability of the event.

Because of this last factor, the experimental error can be atenuated by adding several values of radioactive decay to the same conditions.

A slightly more advanced protocol is:

1. Looking at Americium's ($$^{241}Am_{95}$$) half-life and at the database, compare the number of decays under the same conditions (material in between and distance) in the past and in the present.
2. Verify the mathematical law for Radioactive Decay.
3. For the same material and distance, record a large number of decays.
4. Fit a Gaussian function to the data and see if the fitting improves by adding more experimental data.

# Theoretical Principles

## Geiger-Müller Detector

This device detects radiation levels, providing a number corresponding to how many radioactive particles go through it.

$\frac{dN}{dt} = - \lambda \times N$
where $$\lambda$$ is the decay constant. The solution of this equation tells us that, for a given time, the number of remaining nuclei is $N = N_0 \times e^{- \lambda t}$
Differentiating in relation to time, we get the sample's rate of decay (i.e. how many decays occur per second) a.k.a. radioactivity. $R = \frac{dN}{dt} = N_0 \times \lambda \times e^{- \lambda t}$
The half-life, as the name implies, is the time it takes for an initial sample to decay into half: $T_{^1/_2} = \frac{ln(2)}{\lambda}$