Difference between revisions of "Precision Pendulum Assembly"

From wwwelab
Jump to navigation Jump to search
Line 6: Line 6:
 
'''Contents'''
 
'''Contents'''
  
#[[Precision Pendulum Assembly: Apparatus Description| Apparatus Description]]
+
#[[Precision Pendulum Assembly: Apparatus description| Apparatus description]]
 
#[[Precision Pendulum Assembly: Mechanical assembly| Mechanical assembly]]
 
#[[Precision Pendulum Assembly: Mechanical assembly| Mechanical assembly]]
 
#[[Precision Pendulum Assembly: Electrical interfaces| Electrical interfaces]]
 
#[[Precision Pendulum Assembly: Electrical interfaces| Electrical interfaces]]
 +
#[[Precision Pendulum Assembly: Software management| Software management]]
 
#[[Precision Pendulum Assembly: Calibration| Calibration]]
 
#[[Precision Pendulum Assembly: Calibration| Calibration]]
 
#[[Precision Pendulum Assembly: Partners| Partners]]
 
#[[Precision Pendulum Assembly: Partners| Partners]]

Revision as of 18:02, 23 December 2019

THIS PAGE IS STILL WORK IN PROGRESS

This page is intended to serve as the assembly instructions for the Precision Pendulum, particularly following the setup developed for the WPA project. This page starts with a brief description of the apparatus and its core components. Then it is followed by the description fo the assembly process which is divided into three core parts: the Mechanical assembly, the electronic controller assembly and the calibration of the setup. An additional step is described for those who want to allow "non-remote" operation (ie: local operation in a museum or common area with public access).

Contents

  1. Apparatus description
  2. Mechanical assembly
  3. Electrical interfaces
  4. Software management
  5. Calibration
  6. Partners